Produits

Catégories de Produits

Anneaux de sécurité
Anneaux à montage axial

2008-5008
Anneaux élastiques pour alésage

Les anneaux élastiques en pouce 2008-5008 sont des éléments de sécurité pour les alésages. Par rapport aux correspondantes 2000-5000:

  • ils ont une largeur radiale inférieure;
  • ils garantissent un contact uniforme et concentrique par rapport à l'axe de l’alésage;
  • ils permettent des charges réduites, due à la forme géométrique particulière avec la partie découpée en contact avec la gorge.

Mode d'emploi

Scheda prodotto - 2008-5008
SIZE RING DIMENSIONS GROOVE DIMENSIONS SUPPLEMENTARY DATA WEIGHT PLIERS
no. d1  d1 frac  S tol d3 tol b tol c tol d5 tol d2 tol m tol n FN FR g FRg lbs/1000 straight bent
62 ,625   5/8 ,025 ,002 -,002 ,675 ,010 -,005 ,072 ,004 -,004 ,036 ,004 -,004 ,030 ,010 -,002 ,665 ,002 -,002 ,029 ,003 ,000 ,060 450 1.015 ,028 400 ,700 / /
75 ,750   3/4 ,035 ,002 -,002 ,808 ,010 -,005 ,085 ,004 -,004 ,042 ,004 -,004 ,042 ,010 -,002 ,796 ,002 -,002 ,039 ,003 ,000 ,069 600 1.675 ,031 850 1,300 J0 J01
81 ,812  13/16 ,042 ,002 -,002 ,877 ,010 -,005 ,092 ,005 -,005 ,044 ,005 -,005 ,042 ,010 -,002 ,862 ,003 -,003 ,046 ,003 ,000 ,075 700 2.639 ,034 1.250 2,000 J0 J01
87 ,875   7/8 ,042 ,002 -,002 ,944 ,010 -,005 ,099 ,005 -,005 ,047 ,005 -,005 ,042 ,010 -,002 ,931 ,003 -,003 ,046 ,003 ,000 ,084 850 2.893 ,036 1.250 2,200 J0 J01
93 ,938  15/16 ,042 ,002 -,002 1,015 ,010 -,005 ,106 ,005 -,005 ,051 ,005 -,005 ,042 ,010 -,002 1,000 ,003 -,003 ,046 ,003 ,000 ,093 1.000 3.147 ,038 1.250 2,800 J0 J01
100 1,000     1      ,042 ,002 -,002 1,081 ,010 -,005 ,113 ,005 -,005 ,054 ,005 -,005 ,042 ,010 -,002 1,066 ,003 -,003 ,046 ,003 ,000 ,099 1.150 3.350 ,040 1.250 2,900 J0 J01
106 1,062 1  1/16 ,050 ,002 -,002 1,150 ,015 -,010 ,120 ,006 -,006 ,057 ,006 -,006 ,050 ,010 -,002 1,130 ,004 -,004 ,056 ,004 ,000 ,102 1.250 4.212 ,043 1.800 3,800 J0 J01
112 1,125 1  1/8 ,050 ,002 -,002 1,217 ,015 -,010 ,123 ,006 -,006 ,059 ,006 -,006 ,050 ,010 -,002 1,197 ,004 -,004 ,056 ,004 ,000 ,108 1.400 4.466 ,044 1.800 4,400 J0 J01
118 1,188 1  3/16 ,050 ,002 -,002 1,283 ,015 -,010 ,126 ,006 -,006 ,060 ,006 -,006 ,050 ,010 -,002 1,262 ,004 -,004 ,056 ,004 ,000 ,111 1.600 4.720 ,045 1.800 4,900 J0 J01
125 1,250 1  1/4 ,050 ,002 -,002 1,351 ,015 -,010 ,129 ,006 -,006 ,061 ,006 -,006 ,050 ,010 -,002 1,330 ,004 -,004 ,056 ,004 ,000 ,120 1.750 4.974 ,045 1.800 5,000 J0 J01
131 1,312 1  5/16 ,050 ,002 -,002 1,418 ,015 -,010 ,132 ,006 -,006 ,063 ,006 -,006 ,050 ,010 -,002 1,396 ,004 -,004 ,056 ,004 ,000 ,126 1.950 5.227 ,045 1.800 5,300 J0 J01
137 1,375 1  3/8 ,050 ,002 -,002 1,486 ,015 -,010 ,157 ,006 -,006 ,065 ,006 -,006 ,075 ,000 -,008 1,461 ,004 -,004 ,056 ,004 ,000 ,129 2.100 5.481 ,046 1.800 5,900 J1 J11
143 1,438 1  7/16 ,050 ,002 -,002 1,552 ,015 -,010 ,157 ,006 -,006 ,069 ,006 -,006 ,075 ,000 -,008 1,528 ,004 -,004 ,056 ,004 ,000 ,135 2.300 5.735 ,050 1.800 6,300 J1 J11
150 1,500 1  1/2 ,050 ,002 -,002 1,622 ,015 -,010 ,157 ,006 -,006 ,070 ,006 -,006 ,075 ,000 -,008 1,594 ,004 -,004 ,056 ,004 ,000 ,141 2.500 5.938 ,051 1.800 6,800 J1 J11
156 1,562 1  9/16 ,062 ,003 -,003 1,688 ,020 -,013 ,185 ,007 -,007 ,074 ,007 -,007 ,076 ,015 -,002 1,658 ,005 -,005 ,068 ,004 ,000 ,144 2.650 7.714 ,055 2.900 8,900 J2 J21
162 1,625 1  5/8 ,062 ,003 -,003 1,756 ,020 -,013 ,185 ,007 -,007 ,077 ,007 -,007 ,076 ,015 -,002 1,725 ,005 -,005 ,068 ,004 ,000 ,150 2.850 8.019 ,056 2.900 10,400 J2 J21
168 1,688 1 11/16 ,062 ,003 -,003 1,823 ,020 -,013 ,185 ,007 -,007 ,079 ,007 -,007 ,076 ,015 -,002 1,792 ,005 -,005 ,068 ,004 ,000 ,156 3.100 8.374 ,057 2.900 11,900 J2 J21
175 1,750 1  3/4 ,062 ,003 -,003 1,891 ,020 -,013 ,185 ,007 -,007 ,082 ,007 -,007 ,076 ,015 -,002 1,858 ,005 -,005 ,068 ,004 ,000 ,162 3.300 8.678 ,058 2.900 11,800 J2 J21
187 1,875 1  7/8 ,062 ,003 -,003 2,025 ,020 -,013 ,185 ,007 -,007 ,090 ,007 -,007 ,076 ,015 -,002 1,989 ,005 -,005 ,068 ,004 ,000 ,171 3.750 9.287 ,066 2.900 14,800 J2 J21
200 2,000     2      ,062 ,003 -,003 2,160 ,020 -,013 ,213 ,007 -,007 ,100 ,007 -,007 ,076 ,015 -,002 2,122 ,005 -,005 ,068 ,004 ,000 ,183 4.300 9.896 ,074 2.900 17,400 J2 J21
206 2,062 2  1/16 ,078 ,003 -,003 2,240 ,025 -,015 ,228 ,007 -,007 ,106 ,007 -,007 ,094 ,015 -,002 2,186 ,006 -,006 ,086 ,005 ,000 ,186 4.500 12.840 ,078 4.600 23,200 J2 J21
212 2,125 2  1/8 ,078 ,003 -,003 2,295 ,025 -,015 ,228 ,007 -,007 ,108 ,007 -,007 ,094 ,015 -,002 2,251 ,006 -,006 ,086 ,005 ,000 ,189 4.700 13.246 ,080 4.600 24,300 J2 J21
237 2,375 2  3/8 ,078 ,003 -,003 2,567 ,025 -,015 ,228 ,007 -,007 ,115 ,007 -,007 ,094 ,015 -,002 2,517 ,006 -,006 ,086 ,005 ,000 ,213 5.900 14.718 ,086 4.600 28,600 J2 J21
243 2,438 2  7/16 ,078 ,003 -,003 2,634 ,025 -,015 ,228 ,007 -,007 ,117 ,007 -,007 ,094 ,015 -,002 2,584 ,006 -,006 ,086 ,005   ,216 6.200 15.124 ,088 4.600 30,600 J2 J21
250 2,500 2  1/2 ,078 ,003 -,003 2,700 ,025 -,015 ,228 ,007 -,007 ,120 ,007 -,007 ,094 ,015 -,002 2,648 ,006 -,006 ,086 ,005 ,000 ,222 6.500 15.530 ,090 4.600 32,100 J2 J21
262 2,625 2  5/8 ,093 ,003 -,003 2,840 ,030 -,020 ,260 ,007 -,007 ,128 ,007 -,007 ,109 ,015 -,002 2,781 ,006 -,006 ,103 ,005 ,000 ,234 7.200 19.488 ,094 6.700 45,600 J3 J31
275 2,750 2  3/4 ,093 ,003 -,003 2,975 ,030 -,020 ,260 ,007 -,007 ,134 ,007 -,007 ,109 ,015 -,002 2,914 ,006 -,006 ,103 ,005 ,000 ,246 7.900 20.300 ,098 6.700 47,800 J3 J31
283 2,812 2 13/16 ,093 ,003 -,003 3,063 ,030 -,020 ,260 ,007 -,007 ,139 ,007 -,007 ,109 ,015 -,002 2,980 ,006 -,006 ,103 ,005 ,000 ,252 8.300 20.808 ,102 6.700 49,500 J3 J31
283 2,835 - ,093 ,003 -,003 3,063 ,030 -,020 ,260 ,007 -,007 ,139 ,007 -,007 ,109 ,015 -,002 3,006 ,006 -,006 ,103 ,005 ,000 ,258 8.550 20.808 ,102 6.700 49,500 J3 J31
287 2,875 2  7/8 ,093 ,003 -,003 3,105 ,030 -,020 ,260 ,007 -,007 ,139 ,007 -,007 ,109 ,015 -,002 3,051 ,006 -,006 ,103 ,005 ,000 ,264 8.900 21.315 ,101 6.700 50,100 J3 J31
300 3,000     3      ,093 ,003 -,003 3,245 ,030 -,020 ,260 ,007 -,007 ,143 ,007 -,007 ,109 ,015 -,002 3,182 ,006 -,006 ,103 ,005 ,000 ,273 9.600 22.229 ,106 6.700 52,600 J3 J31
315 3,156 3  5/32 ,109 ,003 -,003 3,408 ,030 -,020 ,315 ,008 -,008 ,149 ,008 -,008 ,125 ,015 -,002 3,348 ,006 -,006 ,120 ,005 ,000 ,288 10.600 27.405 ,109 9.000 69,400 J3 J31
325 3,250 3  1/4 ,109 ,003 -,003 3,509 ,030 -,020 ,315 ,008 -,008 ,151 ,008 -,008 ,125 ,015 -,002 3,446 ,006 -,006 ,120 ,005 ,000 ,294 11.200 28.217 ,110 9.000 72,600 J3 J31
334 3,346 3 11/32 ,109 ,003 -,003 3,611 ,030 -,020 ,315 ,008 -,008 ,155 ,008 -,008 ,125 ,015 -,002 3,546 ,006 -,006 ,120 ,005 ,000 ,300 11.700 29.029 ,111 9.000 75,600 J3 J31
350 3,500 3  1/2 ,109 ,003 -,003 3,780 ,030 -,020 ,315 ,008 -,008 ,154 ,008 -,008 ,125 ,015 -,002 3,710 ,006 -,006 ,120 ,005 ,000 ,315 12.900 30.349 ,110 9.000 80,200 J3 J31
356 3,562 3  9/16 ,109 ,003 -,003 3,850 ,030 -,020 ,315 ,008 -,008 ,155 ,008 -,008 ,125 ,015 -,002 3,776 ,006 -,006 ,120 ,005 ,000 ,321 13.400 30.958 ,110 9.000 82,400 J3 J31
400 4,000     4      ,109 ,003 -,003 4,350 ,030 -,020 ,315 ,008 -,008 ,161 ,008 -,008 ,125 ,015 -,002 4,240 ,006 -,006 ,120 ,005 ,000 ,360 16.900 34.713 ,108 9.000 97,400 J3 J31
Dimensions in inches 
Visionnez les données techniques

Matériaux Utilises

découvrez

Acier à ressort SAE 1060 / EN 10132 - 1/4 (DIN 17222)
De n. 62 à n. 131: bande C60S (C60)

Acier à ressort SAE 1074 / EN 10132 - 1/4 (DIN 17222)
De n. 137 à n. 400: fil C75S (C75)

Dureté

Acier à ressort SAE 1060/1074 / EN 10132 - 1/4 (DIN 17222)
De n. 62 à n. 75: échelle 30N 67.5 ÷ 72 (HRC 49 ÷ 54)
De n. 81 à n. 100: échelle 30N 66 ÷ 71 (HRC 47 ÷ 53)
De n. 106 à n. 334: échelle C 47 ÷ 52
De n. 350 à n. 400: échelle C 45 ÷ 50

Finition de surface standard

découvrez

De n. 62 à n. 400: phosphatés et huilés

Emballage

découvrez

Anneaux élastiques en acier à ressort SAE 1060/1074 / EN 10132 – 1/4 (DIN 17222):
De n. 62 à n. 356: empilés (rollpack) - non alignés
De n. 400: empilés en feuille de papier

Informations complémentaires

Demandes spéciales:
Pour différents matériaux ou finitions de surface, envoyez votre demande d'offre ici.
Prix et quantités minimum à convenir.