Products

Product Categories

Retaining rings
Radially mounting

2304T-5304
Retaining rings for shafts

2304T-5304 are radial retaining rings for shafts in inch dimensions. They are similar to 2304-5304 series but they are light duty and can be mounted in same housing as retaining rings type 2133-5133.

Scheda prodotto - 2304T-5304
SIZE RING DIMENSIONS GROOVE DIMENSIONS SUPPLEMENTARY DATA WEIGHT
    no.     d1 d1 frac d1 mm d3 ref S tol dg tol b d2 tol m tol n min FN lbs FS lbs g FSg lbs nabl min ˉ¹ lbs/1000
T 15 ,156   5/32 4,0 ,320 ,025 ,002 -,002 ,110 ,003 -,003 ,042 ,120 ,004 -,004 ,029 ,006 ,000 ,036 110 325 ,040 130 80.000 ,300
T 18 ,188   3/16 4,8 ,400 ,025 ,002 -,002 ,140 ,003 -,003 ,048 ,148 ,005 -,005 ,029 ,006 ,000 ,040 130 436 ,040 140 80.000 ,450
T 25 ,250   1/4 6,4 ,482 ,025 ,002 -,002 ,188 ,003 -,003 ,058 ,210 ,006 -,006 ,029 ,006 ,000 ,040 200 650 ,040 150 65.000 ,600
T 31 ,312   5/16 7,9 ,588 ,025 ,002 -,002 ,250 ,003 -,003 ,074 ,272 ,006 -,006 ,029 ,006 ,000 ,040 250 792 ,040 150 65.000 ,870
T 37 ,375   3/8 9,5 ,680 ,035 ,002 -,002 ,312 ,004 -,004 ,081 ,331 ,006 -,006 ,039 ,006 ,000 ,044 300 1.320 ,050 200 65.000 1,600
T 43 ,438   7/16 11,1 ,752 ,035 ,002 -,002 ,375 ,004 -,004 ,081 ,390 ,008 -,008 ,039 ,006 ,000 ,048 400 1.878 ,050 300 60.000 1,860
T 50 ,500   1/2 12,7 ,826 ,042 ,002 -,002 ,406 ,004 -,004 ,097 ,440 ,008 -,008 ,046 ,006 ,000 ,060 600 2.132 ,060 450 50.000 2,794
T 62 ,625   5/8 15,9 ,966 ,042 ,002 -,002 ,500 ,005 -,005 ,086 ,531 ,008 -,008 ,046 ,006 ,000 ,094 1.100 2.538 ,060 500 45.000 3,650
T 75 ,750   3/4 19,0 1,095 ,050 ,002 -,002 ,594 ,005 -,005 ,095 ,632 ,010 -,010 ,056 ,008 ,000 ,118 1.600 3.756 ,070 650 38.000 5,350
T 100 1,000      1      25,4 1,415 ,050 ,002 -,002 ,812 ,006 -,006 ,113 ,860 ,010 -,010 ,056 ,008 ,000 ,140 2.600 4.872 ,070 740 25.000 8,600
Dimensions in mm 
View technical data

Materials used

discover

Spring steel SAE 1060 / EN 10132 - 1/4 (DIN 17222)
From no. T 15 to no. T 100: strip C60S (C60)

Hardness

Spring steel SAE 1060 / EN 10132 - 1/4 (DIN 17222)
From no. T 15 to no. T 31:  scale 30N  65.5 ÷ 71 (HRC 46 ÷ 53)
From no. T 37 to no. T 100:  scale C   47 ÷ 53

Standard surface finish

discover

From no. T 15 to no. T 100: phosphated and oiled

Packaging

discover

Retaining rings in Spring Steel SAE 1060 / EN 10132 - 1/4 (DIN 17222)
From no. T 15 to no. T 100: loose in boxes

Additional information

Materials on request
Upon request and for quantities / prices to be established, retaining rings 2304T-5304 can be supplied in Stainless Steel A4 – AISI 316 L (W.N. 1.4404).

Surface finishes on request
Upon request and for quantities / prices to be established, retaining rings 2304T-5304 can be supplied with the following surface finishes:
Electrolytic Zinc Plating