Products

Product Categories

Retaining rings
Radially mounting

2133-5133
Retaining rings for shafts

2133-5133, also commonly known as "E" clips, are radial retaining rings for shafts in inch dimensions, which offer a wide range of application possibilities.
They are easily assembled by simply pushing them directly into a groove on a shaft using the appropriate plier.

Scheda prodotto - 2133-5133
SIZE RING DIMENSIONS GROOVE DIMENSIONS SUPPLEMENTARY DATA WEIGHT
      no.       d1  d1 frac  d1 mm d3 ref s tol dg tol d2 tol m tol n min FN lbs FS lbs g FSg lbs nabl min ˉ¹ lbs/1000
6 ,062 1/16 1,6 ,156 ,010 ,001 -,001 ,051 ,001 -,003 ,052 ,002 ,000 ,012 ,002 ,000 ,010 7 20 ,020 20 40.000 ,024
X-6* ,062 1/16 1,6 ,140 ,010 ,001 -,001 ,051 ,001 -,003 ,052 ,002 ,000 ,012 ,002 ,000 ,010 7 20 ,020 20 40.000 ,028
Y-6* ,062 1/16 1,6 ,187 ,020 ,002 -,002 ,051 ,001 -,003 ,052 ,002 ,000 ,023 ,002 ,000 ,010 7 41 ,025 40 40.000 ,094
X-9 ,094 3/32 2,4 ,230 ,015 ,002 -,002 ,069 ,002 -,003 ,074 ,002 ,000 ,020 ,002 ,000 ,020 20 46 ,040 45 36.000 ,110
9 ,094 3/32 2,4 ,187 ,015 ,002 -,002 ,073 ,001 -,003 ,074 ,002 ,000 ,020 ,002 ,000 ,020 20 46 ,030 45 36.000 ,066
X-11 ,110 7/64 2,8 ,375 ,015 ,002 -,002 ,076 ,001 -,003 ,079 ,002 ,000 ,020 ,002 ,000 ,030 40 61 ,060 60 35.000 ,295
X-12* ,125 1/8 3,2 ,214 ,025 ,002 -,002 ,094 ,001 -,003 ,095 ,002 ,000 ,029 ,002 ,000 ,030 45 110 ,030 108 35.000 ,120
12 ,125 1/8 3,2 ,230 ,015 ,002 -,002 ,094 ,001 -,003 ,095 ,002 ,000 ,020 ,002 ,000 ,030 45 66 ,030 65 35.000 ,077
X-14 ,140 9/64 3,6 ,203 ,015 ,002 -,002 ,100 ,001 -,003 ,102 ,002 ,000 ,020 ,002 ,000 ,038 60 76 ,022 75 32.000 ,064
Y-14* ,140 9/64 3,6 ,250 ,015 ,002 -,002 ,108 ,001 -,003 ,110 ,002 ,000 ,020 ,002 ,000 ,030 45 76 ,030 75 32.000 ,100
14 ,140 9/64 3,6 ,270 ,025 ,002 -,002 ,102 ,001 -,003 ,105 ,002 ,000 ,029 ,003 ,000 ,034 60 173 ,045 170 32.000 ,211
X-15* ,156 5/32 4,0 ,375 ,042 ,002 -,002 ,116 ,001 -,003 ,118 ,002 ,000 ,046 ,003 ,000 ,038 70 300 ,060 250 31.000 ,760
15 ,156 5/32 4,0 ,282 ,025 ,002 -,002 ,114 ,001 -,003 ,116 ,002 ,000 ,029 ,003 ,000 ,040 75 178 ,045 175 31.000 ,216
X-17 ,172 11/64 4,4 ,312 ,025 ,002 -,002 ,125 ,001 -,003 ,127 ,002 ,000 ,029 ,003 ,000 ,044 90 183 ,045 180 30.000 ,266
X-18 ,188 3/16 4,8 ,375 ,025 ,002 -,002 ,122 ,001 -,003 ,125 ,002 ,000 ,029 ,003 ,000 ,062 135 203 ,045 200 30.000 ,422
Y-18* ,188 3/16 4,8 ,470 ,025 ,002 -,002 ,145 ,001 -,003 ,147 ,002 ,000 ,029 ,003 ,000 ,040 90 193 ,045 190 25.000 ,700
Z-18* ,188 3/16 4,8 ,550 ,025 ,002 -,002 ,122 ,001 -,003 ,125 ,002 ,000 ,029 ,003 ,000 ,062 135 203 ,045 200 18.000 1,050
18 ,188 3/16 4,8 ,335 ,025 ,002 -,002 ,145 ,001 -,003 ,147 ,002 ,000 ,029 ,003 ,000 ,040 90 193 ,045 190 30.000 ,268
X-21 ,219 7/32 5,6 ,437 ,025 ,002 -,002 ,185 ,001 -,003 ,188 ,002 ,000 ,029 ,003 ,000 ,030 75 228 ,045 225 26.000 ,477
25 ,250 1/4 6,3 ,527 ,025 ,002 -,002 ,207 ,001 -,003 ,210 ,003 ,000 ,029 ,003 ,000 ,040 115 259 ,045 255 25.000 ,682
X-31 ,312 5/16 7,9 ,500 ,025 ,002 -,002 ,243 ,002 -,004 ,250 ,003 ,000 ,029 ,003 ,000 ,062 225 330 ,045 325 22.000 ,594
Y-31* ,312 5/16 7,9 ,670 ,025 ,002 -,002 ,243 ,002 -,004 ,250 ,003 ,000 ,029 ,003 ,000 ,062 220 325 ,045 320 15.000 1,220
X-37* ,375 3/8 9,5 ,567 ,035 ,002 -,002 ,303 ,002 -,004 ,306 ,003 ,000 ,039 ,003 ,000 ,068 300 680 ,045 680 20.000 1,050
37 ,375 3/8 9,5 ,660 ,035 ,002 -,002 ,300 ,002 -,004 ,303 ,003 ,000 ,039 ,003 ,000 ,072 315 700 ,050 690 20.000 1,410
43 ,438 7/16 11,1 ,687 ,035 ,002 -,002 ,337 ,002 -,004 ,343 ,003 ,000 ,039 ,003 ,000 ,094 480 842 ,050 830 16.500 1,496
X-43 ,438 7/16 11,1 ,600 ,035 ,002 -,002 ,375 ,002 -,004 ,380 ,003 ,000 ,039 ,003 ,000 ,058 280 812 ,035 800 16.500 ,997
50 ,500 1/2 12,7 ,800 ,042 ,002 -,002 ,392 ,002 -,004 ,396 ,003 ,000 ,046 ,003 ,000 ,104 600 1.127 ,060 1.110 14.000 2,420
62 ,625 5/8 15,9 ,940 ,042 ,002 -,002 ,480 ,003 -,005 ,485 ,003 ,000 ,046 ,003 ,000 ,140 1.050 1.441 ,060 1.420 12.000 3,300
X-74 ,750 3/4 19,0 1,000 ,050 ,002 -,002 ,616 ,003 -,005 ,625 ,003 ,000 ,056 ,003 ,000 ,124 1.100 1.979 ,042 1.900 11.000 3,474
75 ,750 3/4 19,0 1,120 ,050 ,002 -,002 ,574 ,003 -,005 ,580 ,003 ,000 ,056 ,003 ,000 ,170 1.500 2.030 ,065 2.000 10.500 5,577
87 ,875 7/8 22,2 1,300 ,050 ,002 -,002 ,668 ,003 -,005 ,675 ,003 ,000 ,056 ,003 ,000 ,200 2.050 2.385 ,065 2.350 9.000 7,414
X-98 ,984 63/64 25,0 1,500 ,050 ,002 -,002 ,822 ,003 -,005 ,835 ,003 ,000 ,056 ,003 ,000 ,148 1.750 2.639 ,065 2.700 6.500 9,319
X-98 1,000 1 25,4 1,500 ,050 ,002 -,002 ,822 ,003 -,005 ,835 ,003 ,000 ,056 ,003 ,000 ,164 1.900 2.690 ,057 2.700 6.500 9,319
X-118 1,188 1  3/16 30,2 1,626 ,062 ,003 -,003 1,066 ,006 -,010 1,079 ,005 ,000 ,068 ,004 ,000 ,108 1.500 3.501 ,070 3.450 5.500 10,637
X-137 1,375 1  3/8 34,9 1,875 ,062 ,003 -,003 1,213 ,006 -,010 1,230 ,005 ,000 ,068 ,004 ,000 ,144 2.350 4.162 ,070 4.100 4.000 14,010
Dimensions in inches 
* Non standard size on request  
View technical data

Materials used

discover

Spring steel SAE 1060 / EN 10132 - 1/4 (DIN 17222)
From no. 6 to no. X-137: strip C60S (C60)

Hardness

Spring steel SAE 1060 / EN 10132 - 1/4 (DIN 17222)
From no. 6 to no. X-6:   scale 15N 84.5 ÷ 87* (HRC 48 ÷ 53)
From no. Y-6 to no. Y-14:  scale 15N 84.5 ÷ 87 (HRC 48 ÷ 53)
From no. 14 to no. X-31:  scale 30N 66.5 ÷ 71 (HRC 48 ÷ 53)
From no. 37 to no. X-137:  scale C  47 ÷ 52

* hardness can not be checked with any degree of accuracy directly on these circlips

Standard surface finish

discover

From no. 6 to no. X-137: phosphated and oiled

Packaging

discover

Retaining rings in Spring Steel SAE 1060 / EN 10132 - 1/4 (DIN 17222)
From no. 6 to no. X-137: loose in boxes

Additional information

Materials on request
Upon request and for quantities / prices to be established, retaining rings 2133-5133 can be supplied in Stainless Steel A4 – AISI 316 L (W.N. 1.4404).

Packaging on request
Upon request and for quantities / prices to be established, retaining rings 2133-5133 can be supplied taped.

Surface finishes on request
Upon request and for quantities / prices to be established, retaining rings 2133-5133 can be supplied with different surface finishes. Click here to send your request for a different surface finish.